Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions Ingestion-build-65808 • Tension clamps for self

• Tension clamps for self supporting system – EN 50483-2

Test centres or any person involved in the testing of mobile general operating tables

take advantage of OH&S opportunities

whereas active reflectors have an electronic element

Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions Ingestion-build-65808 • Tension clamps for self1 Scope This Technical Specification specifies a compliance test for routine testing providing information on the leaching of monolithic waste which can be obtained under the experimental conditions specified hereafter with a single batch leaching test at a specified liquid to surface area ratio (L A) of 12 (cm3cm 2). It applies to test portion of monolithic waste of regular shape, with a minimum dimension of 40 mm in all directions, obtained e. g. by