Petroleum products. Corrosiveness to copper. Copper strip test Ingestion-build-143074 together with some choices

together with some choices

With BS EN 50636-2-100 you can be ensured that the products consistently meet and exceed quality assurance targets

or a part of it

BS 7465 on terms and definitions to be used in describing cork can be found is beneficial for:

Petroleum products. Corrosiveness to copper. Copper strip test Ingestion-build-143074 together with some choices1 Scope This International Standard specifies a method for the determination of the corrosiveness to copper of liquid petroleum products and certain solvents. Volatile products, having a maximum vapour pressure of 124 kPa at 37,8 C are included. Volatile products with a vapour pressure above 124 kPa at 37,8 C should be tested according to ISO 6251 (see caution below). Electrical insulating oils should be tested according to ISO 5662. CAUTION Some