180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (42.0 mm OD, 177.8 mm CLR) 1/2" 120" tubing or NPS 1-1/2

120" tubing or NPS 1-1/2 pipe manually

SE checks to verify sufficient material is available for the bending process

In the graphic below you can watch the part being created as the values are entered in

Outside Diameter of Pipe: 1

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (42.0 mm OD, 177.8 mm CLR) 1/2" 120" tubing or NPS 1-1/2Specs Outside Diameter of the Tubing (OD): 42. 0 mm Minimum Wall Thickness (DOM): 0. 095" (2. 4 mm) Minimum Wall Thickness (4130): 0. 095" (2. 4 mm) Minimum Wall Thickness (ERW): 0. 083" (2. 1 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of Bend: 180, after springback Maximum Ovality: <10%,